The auto-ranging function on the HX0030B probe provides direct measurement readings without requiring any adjustments to the SCOPIX analyser-oscilloscope.
It is equipped with 2 configurable buttons for remote control of the SCOPIX. There is a 3rd button on top of the probe to activate the LED for improved lighting of the test area.
The general-purpose HX0130 electronic probe allows direct measurement reading by means of automatic scaling (no adjustments necessary on the SCOPIX analyser-oscilloscope) with 1/10 attenuation (500MHz 300V CAT II).
These accessories are used to optimize measurements on electronic systems.
HX0034 current clamp:
0.02 A to 60 ARMS / 1 MHz
The HX0034 current clamp uses a Hall-effect sensor and can measure DC or AC currents up to 80 A peak, without any intervention on the electrical installation. Its internal electronics are powered by the oscilloscope via the connection cable. The measurement output is totally isolated to ensure safety.
This clamp is equipped with 2 configurable buttons for remote control of a SCOPIX. The DC offset is automatically compensated by pressing a button.
The HX0061 can be used to power the SCOPIX from the battery of a vehicle whose on-board voltage range is compatible ( 10 VDC to 60 VDC). This accessory is connected to the standard SCOPIX power supply.
It is ideal for travelling users who can then recharge the battery of their instrument in their vehicle between two measurement sessions. It can also be used to carry out the on-board tests on the vehicle without any battery-life constraints, or to work alternately with 2 batteries in order to double the SCOPIX's battery life.
This accessory can be used to recharge the SCOPIX battery after removing it from the instrument. This kit comprises a connector to link the external charger to a spare NiMh battery. This kit is connected to the external battery charger delivered as standard with the SCOPIX.