Applications

Current clamps and sensors

Applications C160 Oscilloscope clamp for measuring alternating currents

C160 Oscilloscope clamp for measuring alternating currents


Current clamps and sensors


The C Series is a range of high-performance 1,000 A transformer clamps. The round jaw shape and the uniformly-distributed winding guarantee accuracy and minimum phase difference.  Output signal: AC voltage  Output / input ratio: 100 mV / A AC, 10 mV / A AC, 1 mV / A AC,  Output via coaxial cable and isolated male BNC plug

Applications D38N Oscilloscope clamp for measuring alternating currents

D38N Oscilloscope clamp for measuring alternating currents


Current clamps and sensors


The D Series is a range of transformer clamps for accurate measurement of alternating currents up to 3,000 A. 

  • Output signal: AC voltage 
  • Output / input ratio: 10 mV / A AC, 1 mV / A AC, 0.1 mV / A AC 
  • Output via coaxial cable and isolated male BNC plug

Applications E3N Oscilloscope clamp for measuring direct and alternating currents

E3N Oscilloscope clamp for measuring direct and alternating currents


Current clamps and sensors


The EN Series is a range of Hall-effect clamps for measuring direct and alternating currents. 

  • Rated current: 150 A AC/DC  Output signal: DC and AC voltage  
  • Output / input ratio: 1 mV / mA, 1 mV / A 
  • Output via coaxial cable and isolated BNC male plug

Applications MA200 MiniFlex Flexible oscilloscope probes for AC current

MA200 MiniFlex Flexible oscilloscope probes for AC current


Current clamps and sensors


The MA200 Series is a family of "high-frequency" flexible sensors for viewing and measuring electrical or electrotechnical currents with significant variations and  amplitude.

  • Measurement range from 500 mA AC to 3,000 A AC 
  • Single or bi-calibre 
  • Bandwidth of up to 1 MHz 
  • 3 clamping diameters: 45 mm, 70 mm and 100 mm  
  • 600 V CAT IV / 1,000 V CAT III

Applications MN60 Oscilloscope clamp for measuring alternating currents

MN60 Oscilloscope clamp for measuring alternating currents


Current clamps and sensors


Applications PAC 12 Oscilloscope clamp for measuring direct and alternating currents

PAC 12 Oscilloscope clamp for measuring direct and alternating currents


Current clamps and sensors


Rated current: 400 A AC/600 A DC  
Output signal: DC and AC voltage  
Output / input ratio: 10 mV / A, 1 mV / A  
Output via coaxial cable and isolated BNC male plug

Applications PAC 22 Oscilloscope clamp for measuring direct and alternating currents

PAC 22 Oscilloscope clamp for measuring direct and alternating currents


Current clamps and sensors


Rated current: 1,000 A AC/1,400 A DC  
Output signal: DC and AC voltage  
Output / input ratio: 10 mV / A, 1 mV / A  
Output via coaxial cable and isolated BNC male plug

Applications Y7N Oscilloscope clamp for measuring alternating currents

Y7N Oscilloscope clamp for measuring alternating currents


Current clamps and sensors


Output signal: AC voltage  
Output / input ratio: 1 mV / A AC  
Output via coaxial cable and isolated BNC male plug



Current clamps and sensors

Selection guide


Find the right instrument for your needs! For analog oscilloscopes, it's here


Copyright © 2017 - CHAUVIN ARNOUX GROUP | Sitemap

Scroll to Top